Wednesday, December 31, 2008

Nihon Vogue - Dolman and Raglan Update

DOLMAN SWEATER

From Wikipedia - "A Dolman - from Turkish dolaman "robe" is a type of clothing. Originally, the term referred to a long and loose garment with narrow sleeves and an opening in the front.
Dolman was also a favourite style of mantle in the 1870s and 80's, worn by fashionable women. It was often cleverly cut from shawl fabric."


Knitting the Dolman sweater for Nihon Vogue has been a long journey. Because the front and back is knit with sleeves attached to the body, it seems to take almost forever to knit a row from cuff to cuff. I likened it to driving west to east across Montana - a seemingly never ending adventure! My preference was for a "limited" arch underneath the arm to keep the "bat wing-y-ness" to a minimum. In class we first drafted the pattern in our design notebook at quarter scale rather than lifesize. Other than the neckline shaping, the front and the back of the sweater is essentially the same. I used a handpainted yarn in several shades of green with a slip stitch pattern to break up the potential for color pooling or striping. My desire was for the sweater to remind me of a hike through the Hoh Rain Forest but Arlene told me she thought it looked like Army camoflage! The front part of the sweater is split 1/4 down the middle to incorporate a Henley/placket design with buttons.

The process for designing a Dolman sweater is to extend the sleeve from the shoulder point on the drafted design to the wrist point. Lines for 1/2 of the upper arm measurement, 3/5 of the arm length (elbow point) are drawn and connected to the body. The depth of the arch is designed through personal preference after the sleeve ease is added. The stitch increases for the Dolman arch from the body to the sleeve is accomplished by crocheting a yarn chain and then performing a short rowing technique to pick up the appropriate number of stitches from this chain for each side of the sweater. Each sleeve is completed by adding the total number of stitches on the bottom edge of the sleeves calculated by using row and stitch gauge, adding the correct number of stitches to form a triangular wedge from the cuff to the top of the sleeve, and then doing short rows in the large triangular section from the neck, top of cuff and shoulder. The green stitch markers in the photo show the 5 stitch segments for short rowing. I have definitely gotten better at understanding and executing short rows while knitting this sweater! The front and back of the sweater are joined at the sleeves by 3 needle bind off or a weaving Kitchener like stitch (if the pattern is stockinette). I have finished the front and back, joined the top sleeves together, put ribbing on the bottom, seamed up the sides, and knit in the neckband. I still have to sew up the bottom sleeve seam (to be done in the next class), knit the placket ribbing button band, sew on buttons, and knit cuff ribbing. I fear the sleeves on my Dolman sweater may be way too long for my liking. Not sure where I went wrong because the stitch gauge is spot on, but obviously I goofed somewhere. Alas, with the way this sweater is constructed, simply cutting off the bottom of each sleeve won't work ( I confess, yes, I have amputated sweater sleeves in the past!) We'll see what the end result is like. My youngest sister (her arms are longer than mine) may be getting another sweater after all. The Dolman sweater has been a fascinating experience from the start. I'm happy to have done it, but it likely isn't going to be a project I would eagerly repeat anytime soon. If ever.

RAGLAN SWEATER

From Wikipedia - "A raglan sleeve is a type of sleeve whose distinguishing characteristic is to extend in one piece fully to the collar, leaving a diagonal seam from armpit to collarbone. It is popular in sports and exercise wear, and named after the 1st Baron Raglan, probably because it was designed to fit his coat for the arm lost in the Battle of Waterloo".

Naomi has a fantastic description on her blog on the use of geometry during the design of the Raglan sweater. The Raglan begins like the Dolman, meaning the sleeves are extended from the shoulder point. The Raglan utilizes 1/3 the measurement of neck curve to form an isosceles triangle. The line from the neck bisecting the base of the triangle eventually forms the decrease edge for the front, back and sleeves of the Raglan sweater. The purpose of this sweater is for us to learn how to exactly match the pattern at the diagonal seams where the front joins the sleeves and where the back joins the sleeves. Jean wanted us to chose to match the stitch pattern or match stripes, ie vertical or horizontal pattern. She said it was difficult to do both at the same time. For a change, I went the easier route and chose to match horizontally.

I did a fair isle band at the bottom of the front, back and sleeve cuffs and then used a very simple Fibonacci combination of 2 stripes in black, 3 stripes in gray for the rest of each section. This decision was prompted by my declaration of using ONLY stash yarn for Year Two Nihon Vogue projects. I didn't have enough of the black yarn to do 2 stripes of each color, so I had to increase the percentage that the gray yarn was used. With the 3 stripes of gray, it has been amusing to see if the gray yarn is on the proper side of the knitting when I have to increase on a row. Meaning most of the time "yes", and some of the time "no". Jean instructed us to knit each piece separately up to the armhole and then do the decreases as calculated, and shaping to the neckline. Each piece should have the decreases done at the same time so as to not make a mistake. Like the Dolman, the Raglan is not tolerant of mistakes. We will be sewing the sweater together in the next class. So far I have completed 3/4 of each piece and am enjoying knitting Raglan much more than Dolman.

Saturday, December 20, 2008

Wintry Wonderland



I'm not sure this snow is a wintry wonderland or just a wintry mess. Icy road conditions combined with hills in the Pacific Northwest means driving can be treacherous. Another big storm with wind gusts up to 80 mph is expected later in the afternoon and tonight. Two years ago a similar storm blew through and we (along with over one million of our closest friends) were without power for nearly a week. I'm planning to hunker down, make crab cakes, drink hot choocolate and knit.

I have a dubious history with snow - childhood tobogganing accident downhill into a frozen creek bed upon which I broke my elbow and wrist. Another sledding accident in which the resultant crash led to several stitches and a jagged scar over my left eye. Memories of a miserable 10 hour ski outing at Mt. Baker wearing improper outdoor clothing whilst facing a wind chill of 9 degrees. For all my grumbling about the snow, snow crystals and snowflakes are quite extraordinary. Definitely take a moment and take a peek at Caltech Physics Professor Kenneth G. Libbrecht's amazing web site to see more about them - "what they are, where they come from, and just how these remarkably complex and beautiful structures are created, quite literally, out of thin air" at
http://www.its.caltech.edu/~atomic/snowcrystals/
I'll post an update on Nihon Vogue Year 2 projects later this weekend - Dolman, Raglan and Aran.... The top down raglan in llama and wool from Nihon Vogue Year 1 is turning out to be a warm and welcome sweater for this cold climate.

Happy Birthday wishes to my sister Paula today!

Friday, December 19, 2008

Addi Clicks needles versus Knit Picks Interchangeable needles

Interchangeable Needle Comparison:
Addi Click


Description:

  • Set is brand new from Skacel - supplier for lengendary Addi Turbo Circular and Lace needles. Update - product has been available for about 8-9 months now)
  • Addi Click sets available at LYS in limited quantities - kit price ranges from $139.99 to $149.99 depending on LYS source.
  • Needles in US Size 4, 6, 7, 8, 9, 10, 10.75, 11, 13, 15
  • Three blue cables in lengths of 24", 32" and 40"
  • One connector piece which you can use either to join your cable together so that it becomes a stitch holder or to combine cords for longer lengths.
  • Needle Sizer
  • Marketing claim more than 5 hundred combinations
Pros:

  • Superior join with spring lock mechanism that ensures ultra-smooth connection between needles and cables
  • Rounded needle points
  • Supple cables with no kinks
  • Individual needles with easy to read size in US and metric etched on them
  • Cable connector provides flexibility for non standard lengths
  • Appealing blue color cables
Cons:

  • Storage case large and flat but not conducive to travel. When box is tipped on end, the smaller needles fall out of their compartments and get mixed with other needles.
  • Lack of size 5 needle and 10.5 needle
  • Needle sizes in 13 and 15 have limited use for most knitters with skills beyond scarves or for occasional bulky project
  • Only 3 cables
  • Needles only available within the kit. It is currently not possible to replace a single lost needle or replace any that could be confiscated by airport security without having to purchase the entire kit again - NOTE - this has been rectified and needles are now available for purchase individually. Whoot Whoot
  • Moderate to Expensive
Summary:

I purchased my kit at a LYS in Issaquah, WA and paid at the higher end of pricing by yarn stores in other parts of the country. Despite claims of limited availability due to having to inspect each kit, mine seemed to slip through quality control. I had three size 7 needles and a single size 8 needle. The cable connection to a size 9 and 11 needle was not working and repeated attempts to connect them failed. I called the yarn store and they said they would contact Skacel to replace the size 7 needle with a size 8, but the wrong replacement needle was mistakenly sent. I went back to the store, and after much discussion, I exchanged the kit for another one since I did not trust the cable connection that didn't join easily to the size 9 and 11 needles. The cable-needle join is brilliant and ultra smooth. Magnificent engineering. With two common needle sizes missing, limited cables, and a single connector I believe there wasn't enough marketing research with REAL knitters prior to putting their product on the market. It is great configuration for any knitter who only knits one or two pieces at a time, from start to finish - other knitters would want to supplement their needle inventory with other Addi's or additional interchangeable needles. What I find most disconcerting is that purchase of a single needle or pair of needles are unavailable other than in complete set. I have read online that there may be more cables and a size 5 needle included in future sets. That would be a step in the right direction. Like other Addi's, the needles are a joy to knit with but for the price, I would have expected more options. I am confident this will continue to evolve as the product matures. (See UPDATE below!)

March 17, 2009 update - The awkward box holding the needles has seen 4 round trips between my home office to the media room. The box is not holding up well despite the mere 20 foot distance between the rooms. The back spine of the box has come unglued. I shudder to think what would happen if I packed the box up for a trip overseas versus down the hall. I don't think it would survive the trip. Oh yes, and this just in - the most recent issue of Knitter's magazine explains the justification for the absence of the size 5 needle... because the kit is designed for an international audience and the size 5 needles are not popular outside the United States. OK. Fine.... but I must ask - are the size 15's so popular as to be in great demand and flying off the shelves everywhere? Duh. I don't believe I have used size 15 needles for anything. Ever. I have used size 5 needles for ribbing, socks, baby sweaters and adult sweaters etc.
I still suspect a marketing limitation on the part of Skacel. My advice to them -put kits together (or better yet, have needles and cables available individually) to meet the needs of your customers. Not one size fits all for the entire world... because it usually doesn't.

Update August 6, 2009
I am pleased to admit Skacel has done a fantastic job of listening to customers. They now have the Clicks available in individual needles sizes for purchase rather than just the entire kit. The fact that they were only sold as a complete set had been my biggest "gripe" in the past. There is also now a packet that includes a set of 3 different length cables and a connector. They have two slim line, convenient travel cases for double points and for circulars. I purchased the elusive size 5 at the Paradise Fibers booth at the Sock Summit market and couldn't be happier to "complete" my set now from a needle size perspective. I wonder if it would be possible to eventually get packages of just connectors rather than the single one included with 3 cable needles? Thank you Karin and the leadership team at Skacel! Now on to my quest for the perfect, portable case for my lovely Addi Clicks!



Knit Picks




Description:
  • Nickel plated Options set and Harmony birch wood set, each with 9 knitting needle tips, 4 cables, end caps, cable key and zipper pouch for $59.99 and $69.99 respectively.
  • Needles in US Size 4,5,6,7,8,9,10,10.5 and 11
  • Various cables lengths
  • Zippered pouch

Pros:

  • Sharp points
  • Flexible cables
  • Variety of cable lengths
  • Entire set compact for convenient travel or "grab and go"
  • Individual needles sizes available
  • Inexpensive to Moderate price
  • Cable end point caps allow one to knit on multiple pieces at same time
  • Needle size ID tags available

Cons:

  • Metal tips sometimes fall off cable
  • Needle and cable connection not always perfectly aligned or smooth
  • Needle ends sometimes unscrew themselves from the cable and come apart in the middle of knitting
  • Small wire locking pin needed to tighten join between needle and cable
  • Needles not marked so needle sizer required
  • Icky purple color cables. Which is strange I think this because purple is my favorite color!

Summary:

I have both Options and Harmony sets. The nickel plated tips are slick and pointed. The beautiful Harmony wood needles are smooth but not slick - especially good for silk or slippery yarns. The wooden needles break easily if sat upon or caught in the buckle of an airplane seat belt. (Smile) Accessories such as a binder, knitting needle ID tags, cables and cable case are all available on the Knitpicks web site at nominal cost but the quality matches the price. I didn't care for the binder because of the shape, size and color. What I like best of all is that individual needle sets are available at a price of $4.99 to $7.99. I have had some issues with cables not screwing tightly into the needle tip but they have been quickly replaced after a call to customer service. The zippered plastic pouch contains all the needles and cables and is convenient travel with. The case didn't have any identification of which slot held which needle so I used a label maker to affix the needle sizes to the bag to make me easy to immediately find the needle size I am looking for. Not always perfect but a good price performer.


Saturday, December 13, 2008

Pleasanton, CA

Rob joined me on a work trip to the East Bay in California last weekend. We enjoyed sunshine, the company of work colleagues at a staff holiday party, and the generous hospitality of dear friends - Gene and Janice. Their beautiful new home is warm and inviting. Dark hickory floors, impressive master bathroom (larger than most Manhatten apartments I would bet), award winning landscaping in the backyard and chef's kitchen anyone would envy. We had a marvelous time! We had such a good time I completed no essential knitting in preparation for my mid-December Nihon Vogue class. Yikes. Rob was especially thrilled to take the shiny garage toys (BMW and Prius) out for test drives. We attended Gene and Janice's wedding 2.5 years ago in Pebble Beach and they are now expecting their first child, due middle of March. Very exciting and a life changing event for them. I predict a boy. But I have been wrong before. Smile.
On Friday I went into the corporate office to work and Rob set out to hike to the top of Mt. Diablo. Friday night we initiated the kitchen into the world of "home cooking" with pan fried salmon steaks, salad, cous cous and broccoli. Graham crackers, marshmallows and chocolate at the firepit in the backyard. Divine.
On Saturday we drove to Muir Woods. Magnificent. It is impossible to convey by words or even photo's how majestic the woodlands are. Definitely worth a trip there for anyone in the vacinity. We walked along the San Andreas Faultline and drove to Point Reyes beach. Convertible with the top down rental car. How sweet is that? Flew back to Seattle on Sunday. Splendid trip.